When installing the low-temperature drying suspended cableway on the stick noodle production line, attention should be paid to the following: the crossbeam and the active and passive support brackets should be straight and horizontal, all measuring heights should be consistent, and the distance dimensions should be correct. After all transmission bearing seats are adjusted to meet the requirements, they should be fixed with screws to prevent loosening and displacement.
Each driving wheel shall have a unified main shaft transmission, and the driving shaft must be perpendicular to the horizontal plane. The maximum diameter of each driving wheel on both sides shall be aligned with the center of the track, and each track shall be in appropriate position, consistent in height, kept straight, and firmly connected.
The connection between the hanging bracket and the steel wire rope of the hanging surface must be firm, with a consistent hook distance, and an error generally not exceeding 1.8mm. It is required that the left and right sides are equal and the height is consistent.
We, Dongfang Naomu Machinery Equipment Co., Ltd., have been specialized in manufacturing stick noodle equipment and stick noodle production lines for over 40 years. For noodle equipment sold to customers, we have established a good service system from initial consultation to plan setting, on-site visits, and later on-site installation, personnel training, etc. We wholeheartedly provide comprehensive system services and professional technical support for new and old customers.